Turning project: Architectural columns

I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old.  The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long.  Fortunately, my lathe can turn 24-inches by 66-inches long.

I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00. 

 

columns-project

 

I set the timber up on the lathe, located the exact center on both ends and marked the centers.  On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center. 

Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.

 

columns-project-2

 

Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments .  I go for one feature at a time, turning a band,  bead or on ovulo as we go. 

Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut.  Even a sharp gouge left a very rough surface….arrgh!!  So what to do?  The best tool for this occasion was my 1 3/8” Alan Lacer skew.

Red Cedar is a very abrasive wood, which demanded frequent sharpening.  Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours. 

Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!

 

columns-project-1

 

A demanding, and very satisfying project. 

The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!

Don't forget to subscribe to our newsletter to receive special member offers directly to your email.

Capt. Jack Wayne 

Related Posts

Wooden Pieces, Care & Instructions
Wooden Pieces, Care & Instructions
Congratulations! You are a proud owner of an original WoodWhirled piece. Wooden pieces are a nice way to add a little wa...
Read More
Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
We have all chucked up a turning square of one kind or another and, with the set of tools common to most, roughed-out, p...
Read More
Boiling Madrone
Boiling Madrone
A recent post shows the Woodwhirled Crew boiling Madrone…and why do we do this? Madrone is a tree that only grows in a n...
Read More

508 comments

kee

https://github.com/adamhaile/S/issues/66

https://github.com/Aniverse/A/issues/52

https://github.com/Aniverse/A/issues/53

https://github.com/fmtn/a/issues/269

https://github.com/adamhaile/S/issues/67

moy1

https://github.com/youranreus/G/issues/130

https://github.com/Aniverse/A/issues/51

https://github.com/fmtn/a/issues/268

https://github.com/as/a/issues/187

https://github.com/Automattic/_s/issues/1585

https://github.com/ethereumbook/ethereumbook/issues/1239

https://github.com/as/a/issues/188

non2580

https://github.com/shuttlenetwork/old-ngg-bypass/issues/4

https://github.com/ErickSumargo/Dads/issues/98

https://github.com/turingaicloud/quickstart/issues/10

https://github.com/kvspb/nginx-auth-ldap/issues/259

https://github.com/Kr1s77/FgSurfing/issues/2

https://github.com/EmmaDawsonDev/guide-to-HF/issues/210

https://github.com/ZivJia/hmi-workspace/issues/1

https://github.com/Tudmotu/gnome-shell-extension-clipboard-indicator/issues/533

https://github.com/yangsu/sublime-vhdl/issues/26

https://github.com/selfteaching/the-craft-of-selfteaching/issues/1221

https://github.com/chxj1992/kline/issues/112

https://github.com/qingfeng/p/issues/8

https://github.com/boost-ext/te/issues/47

https://github.com/automl/RoBO/issues/120

https://github.com/GoesToEleven/GolangTraining/issues/81

https://github.com/stawel/ht301_hacklib/issues/17

https://github.com/mirror/dd-wrt/issues/459

kaina1111

https://github.com/fsprojects/FSharp.Formatting/issues/955
https://github.com/etexteditor/e/issues/94
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1218
https://github.com/ethereumbook/ethereumbook/issues/1240
https://github.com/youranreus/G/issues/131
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1217

JOK HUM

https://github.com/youranreus/G/issues/124
https://github.com/zserge/o/issues/8
https://github.com/ntop/n2n/issues/1194
https://github.com/xyba1337/ValorantEZTS/issues/3
https://github.com/riscv-software-src/riscv-isa-sim/issues/1929
https://github.com/supercrabtree/k/issues/126
https://github.com/SaeruHikari/SakuraEngine-Old/issues/3
https://github.com/youranreus/G/issues/125
https://github.com/youranreus/G/issues/122
https://github.com/mit-pdos/xv6-riscv/issues/328
https://github.com/MiRO92/uYou-for-YouTube/issues/514
https://github.com/voidint/g/issues/153
https://github.com/mit-pdos/xv6-riscv/issues/326
https://github.com/mit-pdos/xv6-riscv/issues/327
https://github.com/dmpe/R/issues/16
https://github.com/youranreus/G/issues/126
https://github.com/youranreus/G/issues/127
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1206
https://github.com/MiRO92/uYou-for-YouTube/issues/513
https://github.com/defunkt/ambitious_activeldap/issues/14
https://paste.kodi.tv/luhudenora
https://paste.firnsy.com/paste/yqclHJqjfya
https://paste.myst.rs/2qiv3k2

Leave a comment