Turning project: Architectural columns
I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old. The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long. Fortunately, my lathe can turn 24-inches by 66-inches long.
I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00.
I set the timber up on the lathe, located the exact center on both ends and marked the centers. On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center.
Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.
Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments . I go for one feature at a time, turning a band, bead or on ovulo as we go.
Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut. Even a sharp gouge left a very rough surface….arrgh!! So what to do? The best tool for this occasion was my 1 3/8” Alan Lacer skew.
Red Cedar is a very abrasive wood, which demanded frequent sharpening. Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours.
Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!
A demanding, and very satisfying project.
The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!
Don't forget to subscribe to our newsletter to receive special member offers directly to your email.
Related Posts
Tip to finish a bowl - the cool way
Holiday Gift Guide for Mom & Dad
508 comments
https://github.com/mit-pdos/xv6-riscv/issues/326
https://github.com/mit-pdos/xv6-riscv/issues/327
https://github.com/dmpe/R/issues/16
https://github.com/youranreus/G/issues/126
https://github.com/youranreus/G/issues/127
https://github.com/youranreus/G/issues/125
https://github.com/youranreus/G/issues/122
https://github.com/mit-pdos/xv6-riscv/issues/328
https://github.com/MiRO92/uYou-for-YouTube/issues/514
https://github.com/voidint/g/issues/153
https://github.com/ntop/n2n/issues/1194
https://github.com/xyba1337/ValorantEZTS/issues/3
https://github.com/riscv-software-src/riscv-isa-sim/issues/1929
https://github.com/supercrabtree/k/issues/126
https://github.com/SaeruHikari/SakuraEngine-Old/issues/3
https://github.com/phpdude/docker-django-webpack-skeleton/issues/10
https://github.com/natesales/q/issues/109
https://github.com/fuhoujun/e/issues/11
https://github.com/youranreus/G/issues/124
https://github.com/zserge/o/issues/8
Hello, it’s a lovely morning here. I am Vanessa Craig, and I am writing this article to inform everyone that just because we overlook certain information due to our lack of knowledge doesn’t mean it isn’t real. I am currently valued at more than £70 Million Pounds because I acknowledged this vital information. I had assistance from a man named Meduza I found online whose impressive testimonials about his spell work are legit and genuine. His lottery spell enabled me to win £65 Million Pounds in the lottery by providing me with the accurate winning numbers after he performed a lottery spell for me. I placed my full trust in him and followed his instructions without any hesitation and right now, I am proud to say that Meduza’s spiritual advice for winning the lottery is superb and outstanding. I am very grateful to him for his help. To learn more, reach out to him via
WhatsApp: +1 807 907 2687
Email: lordmeduzatemple@hotmail.com
Facebook: lordmeduzatemple