Turning project: Architectural columns

I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old.  The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long.  Fortunately, my lathe can turn 24-inches by 66-inches long.

I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00. 

 

columns-project

 

I set the timber up on the lathe, located the exact center on both ends and marked the centers.  On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center. 

Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.

 

columns-project-2

 

Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments .  I go for one feature at a time, turning a band,  bead or on ovulo as we go. 

Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut.  Even a sharp gouge left a very rough surface….arrgh!!  So what to do?  The best tool for this occasion was my 1 3/8” Alan Lacer skew.

Red Cedar is a very abrasive wood, which demanded frequent sharpening.  Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours. 

Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!

 

columns-project-1

 

A demanding, and very satisfying project. 

The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!

Don't forget to subscribe to our newsletter to receive special member offers directly to your email.

Capt. Jack Wayne 

Related Posts

How to fix a wood crack into a feature
How to fix a wood crack into a feature
Has this ever happened to you?  You have an attractive blank you want to turn, and suddenly the inspiration hits….you kn...
Read More
How to choose the right lathe
How to choose the right lathe
Stationary Lathe Choices The Nova/Teknatool DVR XP is a well performing intermediate lathe.  The strong points are its l...
Read More
Turning a Board Bowl
Turning a Board Bowl
This is an exercise in turning which can open up new vistas and potentials for any turner.  A form of segmented turning ...
Read More

1063 comments

moy1

https://github.com/youranreus/G/issues/130

https://github.com/Aniverse/A/issues/51

https://github.com/fmtn/a/issues/268

https://github.com/as/a/issues/187

https://github.com/Automattic/_s/issues/1585

https://github.com/ethereumbook/ethereumbook/issues/1239

https://github.com/as/a/issues/188

https://github.com/udlbook/udlbook/issues/282

https://github.com/udlbook/udlbook/issues/283

https://github.com/ethereumbook/ethereumbook/issues/1245

https://github.com/siegrin/LucBot/issues/16

https://github.com/supercrabtree/k/issues/129

https://github.com/fmtn/a/issues/270

https://github.com/smu405/s/issues/9

https://github.com/ethereumbook/ethereumbook/issues/1246

https://github.com/MiRO92/uYou-for-YouTube/issues/519

https://github.com/supercrabtree/k/issues/131

https://github.com/adamhaile/S/issues/66

https://github.com/Aniverse/A/issues/52

https://github.com/Aniverse/A/issues/53

https://github.com/fmtn/a/issues/269

https://github.com/adamhaile/S/issues/67

moy1

https://github.com/youranreus/G/issues/130

https://github.com/Aniverse/A/issues/51

https://github.com/fmtn/a/issues/268

https://github.com/as/a/issues/187

https://github.com/Automattic/_s/issues/1585

https://github.com/ethereumbook/ethereumbook/issues/1239

https://github.com/as/a/issues/188

https://github.com/udlbook/udlbook/issues/282

https://github.com/udlbook/udlbook/issues/283

https://github.com/ethereumbook/ethereumbook/issues/1245

https://github.com/siegrin/LucBot/issues/16

https://github.com/supercrabtree/k/issues/129

https://github.com/fmtn/a/issues/270

https://github.com/smu405/s/issues/9

https://github.com/ethereumbook/ethereumbook/issues/1246

https://github.com/MiRO92/uYou-for-YouTube/issues/519

https://github.com/supercrabtree/k/issues/131

https://github.com/adamhaile/S/issues/66

https://github.com/Aniverse/A/issues/52

https://github.com/Aniverse/A/issues/53

https://github.com/fmtn/a/issues/269

https://github.com/adamhaile/S/issues/67

kaina000

https://github.com/simonask/w/issues/20
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1217
https://github.com/youranreus/G/issues/131

kaina000

https://ideone.com/IZhYQa
https://pastelink.net/k5kd1glw
https://paste2.org/cXkXJkyc
https://glot.io/snippets/h6p2j8vd9g
https://github.com/Yalantis/uCrop/issues/948

kaina000

https://rentry.co/pdidckze
https://papaly.com/categories/share?id=173844d74bd9482d97189bd777bbdd18
https://papaly.com/categories/share?id=3e213c24d5aa4870b8fcd3865e5a9a55
https://pastebin.com/h2SAnsgs
https://paste.ee/p/Jxaqivv2

Leave a comment