Turning project: Architectural columns
I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old. The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long. Fortunately, my lathe can turn 24-inches by 66-inches long.
I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00.
I set the timber up on the lathe, located the exact center on both ends and marked the centers. On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center.
Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.
Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments . I go for one feature at a time, turning a band, bead or on ovulo as we go.
Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut. Even a sharp gouge left a very rough surface….arrgh!! So what to do? The best tool for this occasion was my 1 3/8” Alan Lacer skew.
Red Cedar is a very abrasive wood, which demanded frequent sharpening. Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours.
Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!
A demanding, and very satisfying project.
The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!
Don't forget to subscribe to our newsletter to receive special member offers directly to your email.
Related Posts
Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
Boiling Madrone
507 comments
https://abet168.makeweb.co/
https://abet888.makeweb.co/
https://abet789.makeweb.co/
https://abet555.makeweb.co/
https://abet123.makeweb.co/
https://abet777.makeweb.co/
https://abet456.makeweb.co/
https://abet999.makeweb.co/
https://abet222.makeweb.co/
https://github.com/ErickSumargo/Dads/issues/98
https://github.com/turingaicloud/quickstart/issues/10
https://github.com/kvspb/nginx-auth-ldap/issues/259
https://github.com/Kr1s77/FgSurfing/issues/2
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1221
https://github.com/chxj1992/kline/issues/112
https://github.com/boost-ext/te/issues/47
https://github.com/GoesToEleven/GolangTraining/issues/81
https://github.com/stawel/ht301_hacklib/issues/17
https://github.com/mirror/dd-wrt/issues/459
https://abet168.makeweb.co/
https://abet888.makeweb.co/
https://abet789.makeweb.co/
https://abet555.makeweb.co/
https://abet123.makeweb.co/
https://abet777.makeweb.co/
https://abet456.makeweb.co/
https://abet999.makeweb.co/
https://abet222.makeweb.co/
https://github.com/ErickSumargo/Dads/issues/98
https://github.com/turingaicloud/quickstart/issues/10
https://github.com/kvspb/nginx-auth-ldap/issues/259
https://github.com/Kr1s77/FgSurfing/issues/2
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1221
https://github.com/chxj1992/kline/issues/112
https://github.com/boost-ext/te/issues/47
https://github.com/GoesToEleven/GolangTraining/issues/81
https://github.com/stawel/ht301_hacklib/issues/17
https://github.com/mirror/dd-wrt/issues/459
I’m sharing my experience to help anyone who may find themselves in the same difficult situation I was in just a few months ago. I work in the banking sector and, like many others, I was drawn to the world of cryptocurrency with the hope of building a stronger financial future. I took time to do what I believed was proper research. The platform I invested in looked very professional, the team seemed responsive, and everything about it felt legitimate. Unfortunately, I was wrong.
What I did not realize at the time was that I had walked straight into a phishing scam. In a matter of seconds, all of my Bitcoin and USDT holdings were gone. I was in complete shock. Years of savings vanished almost instantly, and I felt absolutely helpless.
The turning point came one weekend when I was playing tennis with some friends. I shared my experience casually, just trying to vent. One of the members of our club told me about Morphohack Cyber Service. He mentioned that his company had worked with them in the past to recover sensitive business data and that their team was trustworthy.
I contacted Morphohack immediately, and from the first conversation, I felt a sense of hope. They took the time to understand my situation, asked for details, and began investigating right away. Within days, they traced the stolen funds and eventually recovered my crypto assets.
I cannot overstate how thankful I am to Morphohack. They were professional, respectful, and most importantly, effective. They turned a nightmare into a story of relief and recovery.
If you have been scammed or lost your crypto, do not give up. There is real help out there. Morphohack gave me back more than just money, they gave me peace of mind. Their contact information: ( Morphohack@cyberservices . com )
https://github.com/ethereumbook/ethereumbook/issues/1245
https://github.com/siegrin/LucBot/issues/16
https://github.com/smu405/s/issues/9
https://github.com/ethereumbook/ethereumbook/issues/1246
https://github.com/MiRO92/uYou-for-YouTube/issues/519
https://github.com/supercrabtree/k/issues/131
https://github.com/EllanJiang/GameFramework/issues/76
https://github.com/gzc/isystem/issues/1
https://github.com/cy4nguy/PythonSimpleKeylogger/issues/3
https://github.com/openai/sparse_attention/issues/13
https://github.com/dashpradeep99/https-github.com-miguellgt-books/issues/6
https://github.com/qw3rtman/p/issues/35
https://github.com/dmpe/R/issues/19
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1219
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1208
https://github.com/ccg2018/ClashA/issues/50
https://github.com/frankstar007/kNN/issues/2
https://github.com/xiesuichao/KLineView/issues/36
https://github.com/LeeJunHyun/Image_Segmentation/issues/99
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1204
https://github.com/udlbook/udlbook/issues/275
https://github.com/selfteaching/the-craft-of-selfteaching/issues/1208
https://github.com/HoyDiamond/DiamondSeo01/issues/1
https://github.com/henryjeff/portfolio-website/issues/16
https://github.com/segmentio/ksuid/issues/86
https://github.com/vroland/epdiy/discussions/418
https://github.com/bitsandbytes-foundation/bitsandbytes/discussions/1631
https://github.com/Koenkk/Z-Stack-firmware/discussions/553
https://github.com/fsprojects/FSharpPlus/discussions/618
https://github.com/chyyuu/os_kernel_lab/discussions/97
https://www.google.tn/url?sa=t&url=https://github.com/NJU-ProjectN/ics2015/issues/16
https://www.google.tn/url?sa=t&url=https://github.com/Aniverse/A/issues/49
https://www.google.tn/url?sa=t&url=https://papaly.com/johnsmith96/84HbY/DiamondSeo274
https://www.google.tn/url?sa=t&url=https://github.com/rafaballerini/GitTutorial/issues/200
https://www.google.tn/url?sa=t&url=https://github.com/vroland/epdiy/discussions/418
https://www.google.tn/url?sa=t&url=https://github.com/chyyuu/os_kernel_lab/discussions/97
https://www.google.tn/url?sa=t&url=https://pastebin.com/6KaC9UJK
https://www.google.tn/url?sa=t&url=https://etextpad.com/ybpzareg6g
https://www.google.tn/url?sa=t&url=https://paste.ee/p/WLfb81zq
https://www.google.tn/url?sa=t&url=https://ideone.com/Gt2pMj
https://www.google.tn/url?sa=t&url=https://pastelink.net/hpd79igh
https://www.google.tn/url?sa=t&url=https://github.com/Koenkk/Z-Stack-firmware/discussions/553
https://www.google.tn/url?sa=t&url=https://rentry.co/pdidckze
https://www.google.tn/url?sa=t&url=https://papaly.com/categories/share?id=173844d74bd9482d97189bd777bbdd18
https://www.google.tn/url?sa=t&url=https://papaly.com/categories/share?id=3e213c24d5aa4870b8fcd3865e5a9a55
https://www.google.tn/url?sa=t&url=https://pastebin.com/h2SAnsgs
https://www.google.tn/url?sa=t&url=https://paste.ee/p/Jxaqivv2
https://www.google.tn/url?sa=t&url=https://github.com/fsprojects/FSharpPlus/discussions/618
https://www.google.tn/url?sa=t&url=https://ideone.com/IZhYQa
https://www.google.tn/url?sa=t&url=https://pastelink.net/k5kd1glw
https://www.google.tn/url?sa=t&url=https://paste2.org/cXkXJkyc
https://www.google.tn/url?sa=t&url=https://glot.io/snippets/h6p2j8vd9g
https://www.google.tn/url?sa=t&url=https://github.com/Yalantis/uCrop/issues/948
https://www.google.tn/url?sa=t&url=https://github.com/bitsandbytes-foundation/bitsandbytes/discussions/1631