Turning project: Architectural columns
I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old. The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long. Fortunately, my lathe can turn 24-inches by 66-inches long.
I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00.
I set the timber up on the lathe, located the exact center on both ends and marked the centers. On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center.
Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.
Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments . I go for one feature at a time, turning a band, bead or on ovulo as we go.
Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut. Even a sharp gouge left a very rough surface….arrgh!! So what to do? The best tool for this occasion was my 1 3/8” Alan Lacer skew.
Red Cedar is a very abrasive wood, which demanded frequent sharpening. Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours.
Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!
A demanding, and very satisfying project.
The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!
Don't forget to subscribe to our newsletter to receive special member offers directly to your email.
Related Posts
Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
Boiling Madrone
498 comments
I was scammed out of over $40,000 in cryptocurrency. One wrong decision, one convincing platform, and my investment disappeared. The panic, the regret, and the feeling of being completely powerless it was overwhelming. I honestly thought it was gone for good. Then I found Astraweb and Reached out to them It was the turning point. Their response was fast, focused, and professional. They didn’t make promises they delivered results. Through advanced blockchain tracking, legal pressure, and technical expertise, they were able to recover a major portion of my stolen funds. I still can’t believe how quickly they moved and how thorough they were. Astraweb didn’t just recover my money they restored my trust. They treated my case like it mattered, and their team walked me through every step with clarity and care. If you’ve lost crypto and think it’s over it’s not. I was in your shoes. Don’t wait. Reach out to Astraweb. It could be the best decision you make.
Email: AstraWeb@Cyberdude.com
Be careful of crypto platforms promising huge returns. They are luring people into fake programs. There is no shame in speaking out, most of us have been there too. We just have to be more careful. I was scammed of 30,450 USD in the middle of last year. I realized it was all scam after i made the third payment. A person from Bitcoin Abuse Forum recommended ZATTECH recovery and he was very helpful especially in recovering my lost funds, you can contact him via email on zattechrecovery ⓐ Gmail com. He could help you track them and hopefully recover your lost funds
Losing about $605,000 to a fake investment scam was one of the worst experiences of my life. I was completely crushed—emotionally and financially. I had no idea who to turn to, and honestly, I thought the money was gone for good.
Then I found TROYHACKS CYBER SERVICE, and everything started to change.
From our first conversation, they were professional, honest, and incredibly supportive. They didn’t make any wild promises—they just calmly explained what they could do, how the process worked, and what the chances were. That honesty meant a lot to me.
What really stood out was how dedicated and skilled they were. They worked carefully and consistently, and to my absolute relief, they were able to recover my lost digital assets. I still can’t fully put into words how grateful I am. It wasn’t just about the money—it was about getting a part of my life back.
I can’t thank TROYHACKS CYBER SERVICE enough for their help. They were professional, understanding, and genuinely cared about getting a good outcome for me. If you’ve been through something similar, please don’t lose hope. Reach out to them—you won’t regret it.
You can contact them directly at [Troyhacks@cyberservices.com]. WhatsApp +1 (260) 237-6241 They helped me when I thought no one could, and I’ll always be grateful.
I NEED A HELP HOW TO RECOVER MY LOST CRYTOPCURRENCY
I know many things could have gone wrong this past few days investing online and getting burnt. I was also in your shoes when I invested into a binary option where I got scammed of $3000 of BTC but thanks to the help of TSUTOMU SHIMOMURA They assisted me in recovering back my lost BTC. I initially didn’t trust them but I was referred by a friend who I trust well. I was able to get my refund within the space of two weeks. Thanks to TSUTOMU SHIMOMURA, you can also contact them via WEBSITE: https://tsutomushackexpert.com/ or WhatsApp via: +12569564498, or Telegram @TsutomuShimomurahacker, and I’m sure you will be happy you did.
I’m grateful Jefferson Lucas for your wonderful masterclass strategy which has help me earn at least $8,000 weekly using his masterclass strategy and has also helped me recover all my lost money in binary options trading, i recommend his help to each traders whose point is to succeed and make good profits in binary options and also for those who wants to get back all their lost money and for those who are new in trading or have any issues in trading’s, you can contact him on: Email: Jeffersonlucas095@gmail.com