Turning project: Architectural columns

I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old.  The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long.  Fortunately, my lathe can turn 24-inches by 66-inches long.

I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00. 

 

columns-project

 

I set the timber up on the lathe, located the exact center on both ends and marked the centers.  On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center. 

Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.

 

columns-project-2

 

Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments .  I go for one feature at a time, turning a band,  bead or on ovulo as we go. 

Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut.  Even a sharp gouge left a very rough surface….arrgh!!  So what to do?  The best tool for this occasion was my 1 3/8” Alan Lacer skew.

Red Cedar is a very abrasive wood, which demanded frequent sharpening.  Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours. 

Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!

 

columns-project-1

 

A demanding, and very satisfying project. 

The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!

Don't forget to subscribe to our newsletter to receive special member offers directly to your email.

Capt. Jack Wayne 

Related Posts

Wood Sources and Preparation
Wood Sources and Preparation
As a beginning woodturner, one of your first anxieties is finding a source of material.  If there is a store nearby that...
Read More
How to fix a wood crack into a feature
How to fix a wood crack into a feature
Has this ever happened to you?  You have an attractive blank you want to turn, and suddenly the inspiration hits….you kn...
Read More
How to choose the right lathe
How to choose the right lathe
Stationary Lathe Choices The Nova/Teknatool DVR XP is a well performing intermediate lathe.  The strong points are its l...
Read More

1065 comments

JOK HUM

https://github.com/phpdude/docker-django-webpack-skeleton/issues/10
https://github.com/natesales/q/issues/109
https://github.com/fuhoujun/e/issues/11
https://github.com/youranreus/G/issues/124
https://github.com/zserge/o/issues/8

Vanessa

Hello, it’s a lovely morning here. I am Vanessa Craig, and I am writing this article to inform everyone that just because we overlook certain information due to our lack of knowledge doesn’t mean it isn’t real. I am currently valued at more than £70 Million Pounds because I acknowledged this vital information. I had assistance from a man named Meduza I found online whose impressive testimonials about his spell work are legit and genuine. His lottery spell enabled me to win £65 Million Pounds in the lottery by providing me with the accurate winning numbers after he performed a lottery spell for me. I placed my full trust in him and followed his instructions without any hesitation and right now, I am proud to say that Meduza’s spiritual advice for winning the lottery is superb and outstanding. I am very grateful to him for his help. To learn more, reach out to him via

WhatsApp: +1 807 907 2687
Email: lordmeduzatemple@hotmail.com
Facebook: lordmeduzatemple

kee

https://github.com/adamhaile/S/issues/66

https://github.com/Aniverse/A/issues/52

https://github.com/Aniverse/A/issues/53

https://github.com/fmtn/a/issues/269

https://github.com/adamhaile/S/issues/67

moy1

https://github.com/youranreus/G/issues/130

https://github.com/Aniverse/A/issues/51

https://github.com/fmtn/a/issues/268

https://github.com/as/a/issues/187

https://github.com/Automattic/_s/issues/1585

https://github.com/ethereumbook/ethereumbook/issues/1239

https://github.com/as/a/issues/188

non2580

https://github.com/shuttlenetwork/old-ngg-bypass/issues/4

https://github.com/ErickSumargo/Dads/issues/98

https://github.com/turingaicloud/quickstart/issues/10

https://github.com/kvspb/nginx-auth-ldap/issues/259

https://github.com/Kr1s77/FgSurfing/issues/2

https://github.com/EmmaDawsonDev/guide-to-HF/issues/210

https://github.com/ZivJia/hmi-workspace/issues/1

https://github.com/Tudmotu/gnome-shell-extension-clipboard-indicator/issues/533

https://github.com/yangsu/sublime-vhdl/issues/26

https://github.com/selfteaching/the-craft-of-selfteaching/issues/1221

https://github.com/chxj1992/kline/issues/112

https://github.com/qingfeng/p/issues/8

https://github.com/boost-ext/te/issues/47

https://github.com/automl/RoBO/issues/120

https://github.com/GoesToEleven/GolangTraining/issues/81

https://github.com/stawel/ht301_hacklib/issues/17

https://github.com/mirror/dd-wrt/issues/459

Leave a comment