Turning project: Architectural columns

I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old.  The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long.  Fortunately, my lathe can turn 24-inches by 66-inches long.

I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00. 

 

columns-project

 

I set the timber up on the lathe, located the exact center on both ends and marked the centers.  On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center. 

Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.

 

columns-project-2

 

Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments .  I go for one feature at a time, turning a band,  bead or on ovulo as we go. 

Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut.  Even a sharp gouge left a very rough surface….arrgh!!  So what to do?  The best tool for this occasion was my 1 3/8” Alan Lacer skew.

Red Cedar is a very abrasive wood, which demanded frequent sharpening.  Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours. 

Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!

 

columns-project-1

 

A demanding, and very satisfying project. 

The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!

Don't forget to subscribe to our newsletter to receive special member offers directly to your email.

Capt. Jack Wayne 

Related Posts

How to fix a wood crack into a feature
How to fix a wood crack into a feature
Has this ever happened to you?  You have an attractive blank you want to turn, and suddenly the inspiration hits….you kn...
Read More
How to choose the right lathe
How to choose the right lathe
Stationary Lathe Choices The Nova/Teknatool DVR XP is a well performing intermediate lathe.  The strong points are its l...
Read More
Turning a Board Bowl
Turning a Board Bowl
This is an exercise in turning which can open up new vistas and potentials for any turner.  A form of segmented turning ...
Read More

943 comments

Thomas Roland

FINALLY I GOT MY LOST BITCOIN BACK ALL THANKS TO TSUTOMU SHIMOMURA

Hello everyone I want to use this Medium to say big thank you to TSUTOMU SHIMOMURA for they helped me recover my stolen crypto worth $250,000 through their hacking skills I tried it I was skeptical but it worked and I got my money back, I’m so glad I came across them early websites . you can also contact them via WEBSITE: https://tsutomushackexpert.com/ or Email address support@tsutomushackexpert.com, and I’m sure you will be happy you did.

William Grant

Living a pleasant life is a blessing and some people do not want that blessing for you, so they try to steal your joy by invading your private and information but they are people who are for this kind of situation, to protect your personal information and also to get back if it gets outside, with premiumhackservices@gmail.com, it just gets better and better, Whatsapp : +14106350697 is also one of their contact line, go get back your pleasant life and be happy.

💎Diamond168 💎ให้ไม่ได้แต่ความเสียใจ

https://diamondlnwpg168.com/
https://www.paiklangna.com/
https://br.advfn.com/forum/perfil/bluezardriri9
https://scrapbox.io/noneyseo1/NonneySeo
https://cara.app/noney168/all
https://www.bitsdujour.com/profiles/aCQrfW
https://yesilkartforum.com/forum/user/noney1688
https://forum.lexulous.com/user/bluezardriri
https://popl.co/profile/KJdIwsLe/dash
https://github.com/Programming-from-A-to-Z/A2Z-F15/issues/30
https://github.com/defunkt/ambitious_activeldap/issues/14
https://github.com/openai/sparse_attention/issues/13
https://github.com/dashpradeep99/https-github.com-miguellgt-books/issues/6
https://github.com/HoyDiamond/DiamondSeo01/issues/1
https://github.com/cy4nguy/PythonSimpleKeylogger/issues/3
https://github.com/gzc/isystem/issues/1
https://github.com/SaeruHikari/SakuraEngine-Old/issues/3
https://github.com/xyba1337/ValorantEZTS/issues/3
https://github.com/henryjeff/portfolio-website/issues/16
https://github.com/EllanJiang/GameFramework/issues/76
https://github.com/HoyDiamond/DiamondSeo01/issues/2
https://github.com/qianjiahao/MongoDB/issues/2
https://github.com/u21h2/nacs/issues/13
https://github.com/Programming-from-A-to-Z/A2Z-F15/issues/31
https://github.com/qw3rtman/p/issues/35
https://github.com/Pleumpi1688/Kittichaiya1680/discussions/1
https://github.com/bitsandbytes-foundation/bitsandbytes/discussions/1631
https://github.com/rafaballerini/GitTutorial/issues/200
https://github.com/Yalantis/uCrop/issues/948

Diamond168ยินดีต้อนรับ

http://diamondlnwpg168.com/
https://paiklangna.com/
https://github.com/11DIAMOND168/Mac/issues/1
https://github.com/22DIAMOND168/Mack/issues/1
https://github.com/DIAMOND168MM/Mac/issues/1
https://github.com/DIAMOND168MM/Mac/issues/1
https://github.com/DAMDAMme11225566/Natoo/issues/1
https://github.com/MAVKMAVK11111111111142/Mack1259/issues/1
https://github.com/sggsdfsdfdsfds6745123/NAgoo168/issues/1
https://github.com/Lertkoonawong/Chartsombat111/issues/1
https://github.com/Prasanwong/Intaraprasart/issues/1
https://github.com/Rattanaprasert/Sangsawang111/issues/1
https://github.com/Narinchanok/Suwanwechatada111/issues/1
https://github.com/Suwankaruna/Dechaboon111/issues/2
https://github.com/Pitijamroen/Rattanaprasert111/issues/1
https://github.com/Roongrudee44/Kwankaew111/issues/1
https://github.com/4DIAMOND168/Phan/issues/1
https://github.com/5DIAMOND168/May/issues/1
https://github.com/3DIAMOND168/Muay/issues/1
https://github.com/6DIAMOND168/Mack/issues/1
https://github.com/2DIAMOND168/Mack/issues/1
https://github.com/1DIAMOND168/Mack/issues/1
https://github.com/12DIAMOND168/Mack/issues/1
https://github.com/16DIAMOND168/Mack/issues/1
https://github.com/8DIAMOND168/Mack/issues/1
https://github.com/7DIAMOND168/Mack1/issues/1
https://github.com/DIAMOND168N/Mavk/issues/1

ลูกค้าคือพระเจ้า

https://github.com/kaina134556666666666/kaina123/issues/1
https://github.com/Thanaratchaku/Thammapak-/issues/1
https://github.com/Reongsamai/Pipattanakul/issues/1
https://github.com/Jarassopon/Chartpipak-/issues/1
https://github.com/Prommabuth/Srisarawong/issues/1
https://github.com/Thammapak/Srisawatwongchai-/issues/1
https://github.com/Gongkiatsakul/Pichitcharoenwong-/issues/1
https://github.com/Narinchanok/Anansapcharoen/issues/1
https://github.com/Panichvattanaku/Pichitcharoenwong-/issues/1
https://github.com/Vichayaprasertkul/Siripapan/issues/1
https://github.com/Nitithamrong/Rattanaprasert/issues/1
https://github.com/Rattanaprasit22/Udomsawatdisuk-/issues/1
https://github.com/Chakraphanpradit/Kajornsakkoso/issues/1
https://github.com/Gongkiatsakul/Pichitcharoenwong-/issues/1
https://github.com/Narinchanok/Anansapcharoen/issues/1
https://github.com/Panichvattanaku/Pichitcharoenwong-/issues/1
https://github.com/Vichayaprasertkul/Siripapan/issues/1
https://github.com/Nitithamrong/Rattanaprasert/issues/1
https://github.com/Rattanaprasit22/Udomsawatdisuk-/issues/1
https://github.com/Chakraphanpradit/Kajornsakkoso/issues/1
https://github.com/Wiwatthanasak/Ronnaporn-/issues/1
https://github.com/Supannapakin/Chompunut-/issues/1
https://github.com/antaraprasert/Patanapreecha-/issues/1
https://github.com/Patamadecha/Nichakarn-/issues/1
https://github.com/Jeerawongsa/Kiatwittaya-/issues/1
https://github.com/Bannawan/Weerachai-/issues/1
http://diamondlnwpg168.com/
https://paiklangna.com/

Leave a comment