Turning project: Architectural columns

I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old.  The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long.  Fortunately, my lathe can turn 24-inches by 66-inches long.

I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00. 

 

columns-project

 

I set the timber up on the lathe, located the exact center on both ends and marked the centers.  On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center. 

Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.

 

columns-project-2

 

Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments .  I go for one feature at a time, turning a band,  bead or on ovulo as we go. 

Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut.  Even a sharp gouge left a very rough surface….arrgh!!  So what to do?  The best tool for this occasion was my 1 3/8” Alan Lacer skew.

Red Cedar is a very abrasive wood, which demanded frequent sharpening.  Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours. 

Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!

 

columns-project-1

 

A demanding, and very satisfying project. 

The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!

Don't forget to subscribe to our newsletter to receive special member offers directly to your email.

Capt. Jack Wayne 

Related Posts

How to fix a wood crack into a feature
How to fix a wood crack into a feature
Has this ever happened to you?  You have an attractive blank you want to turn, and suddenly the inspiration hits….you kn...
Read More
How to choose the right lathe
How to choose the right lathe
Stationary Lathe Choices The Nova/Teknatool DVR XP is a well performing intermediate lathe.  The strong points are its l...
Read More
Turning a Board Bowl
Turning a Board Bowl
This is an exercise in turning which can open up new vistas and potentials for any turner.  A form of segmented turning ...
Read More

1507 comments

✨เว็บ Diamond168 ของแท้✨ฟรีสปิuเข้าง่าย🏆

https://raindrop.io/nondiamomd1/diamond-12-1-69-65405752

https://mastodon.social/@bluerocker01/115881312992440842

https://guyanahub.com/post/8250

https://guyanahub.com/post/8251

https://guyanahub.com/post/8252

https://opensource.ieee.org/-/snippets/94

https://diamondlnwpg168.com/

herbertlawson034

https://myromancescammerep-3.readme.io/
https://lovealertep.readme.io/
https://venussgroomep-1.readme.io/
https://yiwadatangeps-11.readme.io/
https://yiwadatangep-12.readme.io/
https://kularblenfaieps-3.readme.io/
https://muteluv9templeseps-2.readme.io/
https://yesterdayeps-3.readme.io/
https://catforcasheps.readme.io/
https://peachlovereps-5.readme.io/
https://x.com/paticianita/status/2023099123533307960
https://x.com/paticianita/status/2022740249160683590
https://contra.com/community/Hr7QoCLw
https://forum.phuongnamedu.vn/threads/bsjdjsdisdsd.230597/
https://www.tipga.com/e/69927bc43286fe1306892bf3
https://connect.usama.dev/posts/68426
https://multy.me/ubtM6
https://ok.ru/profile/910136721401/statuses/157284945690873
https://herbalmeds-forum.biolife.com.my/d/386920-bskdfids
https://diendannhansu.com/threads/bsakjfdisifds.898586/
https://prasatnas.com/posts/265185
https://www.TwosApp.com/6992808c94adefc082977191
https://community.wongcw.com/posts/1210944
https://forums.siliconera.com/threads/bskdfhisdfsdf.147643/
https://bsky.app/profile/did:plc:dn5oxdqg3pvgevepoopsaf57/post/3mewyvgxod227
https://mastodon.social/roatghuang/116077975593035123 https://tooter.in/herbertlawson034/posts/116077976280136026 https://tempel.in/view/qJUtETnp https://chobaolam.vn/threads/iajsdoiasdas.854137/ https://lebanonhub.app/posts/835031 https://hub.vroid.com/en/characters/3901568200123699523/models/4261555187697871146 https://www.audacity-forum.de/index.php?thread/24395-lksmdfl-sdfsd/ https://matters.town/a/234dnv34du39 https://nichey.net/post/335169_https-myromancescammerep-3-readme-io-https-lovealertep-readme-io-https-venussgro.html https://chouseisan.com/s?h=9d3ea649005c405d83c699f4cf6ce399 https://scrapbox.io/jashdjoiasdasd/iadsnmlasd https://businessboostier.mn.co/posts/98016155 https://magic.ly/ikandksadasd/aihdjaisdsad https://medium.com/herbertlawson034/bvisdfsdf-d7e772abe8e3
https://hackmd.io/@0hu9d8Z2TC2u2bktU8K3Pw/ByEC_-g_We
https://wokwi.com/projects/456080598042201089

💎Diamond168💎เว็บหวย | 7 เว็บซื้อหวยออนไลน์ จ่ายจริง บาทละ 90 ซื้อขั้นต่ำ 1 บาท ซื้อหวยออนไลน์เว็บไหนดี

https://raindrop.io/nondiamomd1/diamond-12-1-69-65405752

https://mastodon.social/@bluerocker01/115881312992440842

https://guyanahub.com/post/8250

https://guyanahub.com/post/8251

https://guyanahub.com/post/8252

https://diamondlnwpg168.com/

https://opensource.ieee.org/-/snippets/94

✨เว็บ Diamond168 ของแท้✨ฟรีสปิuเข้าง่าย🏆

https://raindrop.io/nondiamomd1/diamond-12-1-69-65405752

https://mastodon.social/@bluerocker01/115881312992440842

https://guyanahub.com/post/8250

https://guyanahub.com/post/8251

https://guyanahub.com/post/8252

https://opensource.ieee.org/-/snippets/94

https://diamondlnwpg168.com/

💎Diamond168💎เว็บหวย | 7 เว็บซื้อหวยออนไลน์ จ่ายจริง บาทละ 90 ซื้อขั้นต่ำ 1 บาท ซื้อหวยออนไลน์เว็บไหนดี

https://raindrop.io/nondiamomd1/diamond-12-1-69-65405752

https://mastodon.social/@bluerocker01/115881312992440842

https://guyanahub.com/post/8250

https://guyanahub.com/post/8251

https://guyanahub.com/post/8252

https://diamondlnwpg168.com/

https://opensource.ieee.org/-/snippets/94

Leave a comment