Turning project: Architectural columns
I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old. The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long. Fortunately, my lathe can turn 24-inches by 66-inches long.
I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00.
I set the timber up on the lathe, located the exact center on both ends and marked the centers. On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center.
Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.
Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments . I go for one feature at a time, turning a band, bead or on ovulo as we go.
Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut. Even a sharp gouge left a very rough surface….arrgh!! So what to do? The best tool for this occasion was my 1 3/8” Alan Lacer skew.
Red Cedar is a very abrasive wood, which demanded frequent sharpening. Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours.
Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!
A demanding, and very satisfying project.
The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!
Don't forget to subscribe to our newsletter to receive special member offers directly to your email.
Related Posts
Wooden Pieces, Care & Instructions
Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
501 comments
https://t.co/D33PZinOdB
https://t.co/CHenTQ2Igf
https://t.co/4YeESPsyGd
https://t.co/qIPEJA0Cch
https://raindrop.io/bluerocker-non/aa-1-55570737
https://x.com/NP5230322012050/status/1925773995871224105
https://cliqueaqui.bio/gqxhp
https://multy.me/W1FTF
https://t.co/D33PZinOdB
https://t.co/CHenTQ2Igf
https://t.co/4YeESPsyGd
https://t.co/qIPEJA0Cch
https://raindrop.io/bluerocker-non/aa-1-55570737
https://x.com/NP5230322012050/status/1925773995871224105
https://cliqueaqui.bio/gqxhp
https://multy.me/W1FTF
COMMENT ON I NEED HACKER TO RECOVER MONEY FROM BINARY TRADING
WARNING: Scammers will stop at nothing to steal your hard-earned money! But, I’m living proof that TSUTOMU SHIMOMURA can help you RECLAIM YOUR LOST FUNDS! I thought I’d lost my life savings of $58,000 after investing with a fake broker, promising me a whopping $187,000 profit to fund my urgent surgery. But, TSUTOMU SHIMOMURA didn’t give up on me. They worked tirelessly to track down my money and recover it. And, after months of intense effort, they successfully recovered my entire investment – $58,000! I’m now able to focus on my health and recovery, knowing that I’ve been given a second chance thanks to TSUTOMU SHIMOMURA Don’t let scammers ruin your life like they almost did mine! If you’re in a similar situation, don’t hesitate to reach out to TSUTOMU SHIMOMURA They’ll be your champion in the fight against online fraud!" CONTACT THEM VIA. WEBSITE: https://tsutomushackexpert.com/ Telegram @TsutomuShimomurahacker or WhatsApp via: +1-256-956-4498, and I’m sure you will be happy you did.
ARE YOU A VICTIM OF CRYPTOCURRENCY INVESTMENT FRAUD, FOREX OR NFT SCAM? SCHEDULE A MEETING WITH AN ETHICAL HACKER ASAP TO GET STARTED.
Workmanship fee is to be settled AFTER successful recovery.
Let us show you the art of Ethical Hacking….!
ASOREHACKCORP is a private group of financial regulators, private investigation and funds recovery body. We specialize in cases as regards ETHICAL HACKING, CRYPTOCURRENCY, FAKE INVESTMENT SCHEMES and RECOVERY SCAM. We are also experts in CREDIT REPAIR, we analyze what’s impacting your score.
All software tools needed to execute RECOVERIES from start to finish are available in stock.
Kindly NOTE that the available tools does NOT apply to CREDIT FIX.
Be ALERT to FABRICATED reviews and testimonies on the internet, do not get scammed twice.
Contact our team as soon as you can via the email address below to book a mail meeting with an ethical hacker.
asorehackcorp (@) gmail (.) com
Stay Safe out there !³
Confirming that my fraud recovery was successful makes me glad. My name is Tim, and I’m from Los Angeles. I made an investment of $190,700 a few weeks ago, and he assisted me in recovering my money from a fraudulent company in just five working days. All of the money I had invested, including the profit, was returned to me safely, which surprised me. The effort made to recover my money from these fraudsters is really appreciated, and I would recommend wizardjamesrecovery@usa.com for efficient service any day anytime. Thank you. I’ve deposited two bitcoins into a cryptocurrency trading program in the hopes that my money and earnings will increase over time. In just one month, I was able to make a profit of almost $6,000. Up until a few weeks ago, when I was refused access to my account, my investment profit was steadily increasing. At that time, I had roughly $370,500 in Bitcoin, and I wasn’t prepared to lose it to fraud. Since it contained the majority of my savings, I had to look for assistance online in order to get my money back. Since I wasn’t going to take it easy, I connected with Wizard James, a cryptocurrency recovery specialist.