Turning project: Architectural columns
I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old. The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long. Fortunately, my lathe can turn 24-inches by 66-inches long.
I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00.
I set the timber up on the lathe, located the exact center on both ends and marked the centers. On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center.
Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.
Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments . I go for one feature at a time, turning a band, bead or on ovulo as we go.
Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut. Even a sharp gouge left a very rough surface….arrgh!! So what to do? The best tool for this occasion was my 1 3/8” Alan Lacer skew.
Red Cedar is a very abrasive wood, which demanded frequent sharpening. Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours.
Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!
A demanding, and very satisfying project.
The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!
Don't forget to subscribe to our newsletter to receive special member offers directly to your email.
Related Posts
How to fix a wood crack into a feature
How to choose the right lathe
501 comments
https://t.co/7SFFgvSadn
https://t.co/yfToQYsYJI
https://t.co/2tZrk8YgnM
https://t.co/zTZMnMJ0iL
https://t.co/7SFFgvSadn
https://raindrop.io/bluerocker-non/dd-1-55570528
https://x.com/NP5230322012050/status/1925772451356594214
https://cliqueaqui.bio/vwjem
https://multy.me/MShyK
https://t.co/CHenTQ2Igf
https://t.co/4YeESPsyGd
https://t.co/qIPEJA0Cch
https://raindrop.io/bluerocker-non/aa-1-55570737
https://x.com/NP5230322012050/status/1925773995871224105
https://cliqueaqui.bio/gqxhp
https://multy.me/W1FTF
https://t.co/F2iNIKjlvP
https://t.co/CTZcudFOAw
https://t.co/yVEnZYtnxG
https://t.co/so4sxIf4gq
https://raindrop.io/bluerocker-non/ds222-55570788
https://x.com/NP5230322012050/status/1925774505860825105
https://cliqueaqui.bio/ddyvh
https://multy.me/OxhZ6
https://t.co/CHenTQ2Igf
https://t.co/4YeESPsyGd
https://t.co/qIPEJA0Cch
https://raindrop.io/bluerocker-non/aa-1-55570737
https://x.com/NP5230322012050/status/1925773995871224105
https://cliqueaqui.bio/gqxhp
https://multy.me/W1FTF
https://t.co/F2iNIKjlvP
https://t.co/CTZcudFOAw
https://t.co/yVEnZYtnxG
https://t.co/so4sxIf4gq
https://raindrop.io/bluerocker-non/ds222-55570788
https://x.com/NP5230322012050/status/1925774505860825105
https://cliqueaqui.bio/ddyvh
https://multy.me/OxhZ6