Turning project: Architectural columns
I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old. The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long. Fortunately, my lathe can turn 24-inches by 66-inches long.
I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00.
I set the timber up on the lathe, located the exact center on both ends and marked the centers. On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center.
Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.
Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments . I go for one feature at a time, turning a band, bead or on ovulo as we go.
Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut. Even a sharp gouge left a very rough surface….arrgh!! So what to do? The best tool for this occasion was my 1 3/8” Alan Lacer skew.
Red Cedar is a very abrasive wood, which demanded frequent sharpening. Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours.
Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!
A demanding, and very satisfying project.
The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!
Don't forget to subscribe to our newsletter to receive special member offers directly to your email.
Related Posts
Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
Boiling Madrone
496 comments
My name is John Modlin, and I’m a Chief Operating Officer from the United States. I ventured into cryptocurrency investment with high hopes, but unfortunately, I fell victim to a scam that wiped out my funds. In my desperation, I searched online for a hacker to help recover my lost investments. That’s when I found MAYERMUSK RECOVERY COMPANY. Their team was professional and effective, guiding me through the recovery process and helping me regain my lost assets. I highly recommend MAYERMUSK RECOVERY COMPANY to anyone who has been scammed. They truly make a difference!
WhatsApp: +.1. .3.4.7. .4.7.0. .7.6.7.8.
Email: Recoverywizardmayemusk@ cyberservices .com
Website: https:// mayermuskrecoveries .com
My name is John Modlin, and I’m a Chief Operating Officer from the United States. I ventured into cryptocurrency investment with high hopes, but unfortunately, I fell victim to a scam that wiped out my funds. In my desperation, I searched online for a hacker to help recover my lost investments. That’s when I found MAYERMUSK RECOVERY COMPANY. Their team was professional and effective, guiding me through the recovery process and helping me regain my lost assets. I highly recommend MAYERMUSK RECOVERY COMPANY to anyone who has been scammed. They truly make a difference!
WhatsApp: +.1. .3.4.7. .4.7.0. .7.6.7.8.
Email: Recoverywizardmayemusk@ cyberservices .com
Website: https:// mayermuskrecoveries .com
Best Cryptocurrency Recovery Company/Hire Wizard Larry Recovery
Wizard Larry Recovery helped me recover my cryptocurrency that had been duped in less than a day. It can be quite discouraging and disappointing to fall for a Bitcoin investing scam. Unfortunately, recovering misplaced money can be difficult because of the nature of cryptocurrencies. Nonetheless, you can improve your chances of getting your money back by acting appropriately and promptly. Wizard Larry Recovery firm is a trustworthy firm for recovery. They are incredibly dependable and quick at recovering money.
Contact address below
WhatsApp…+1(616) 292-4789 OR +447 (311) 146 749
Email………..Wizardlarry(@)http://mail.com
Website……. http://larrywizard43.wixsite.com/wizardlarry
FINALLY I GOT MY LOST BITCOIN BACK ALL THANKS TO TSUTOMU SHIMOMURA
Hello everyone I want to use this Medium to say big thank you to TSUTOMU SHIMOMURA for they helped me recover my stolen crypto worth $250,000 through their hacking skills I tried it I was skeptic but it worked and I got my money back, I’m so glad I came across them early because I thought I was never going to get my money back from those fake online investment . you can contact them via WEBSITE: https://tsutomushackexpert.com/ or WhatsApp via: +12569564498, or Telegram @TsutomuShimomurahacker, and I’m sure you will be happy you did.
COMMENT ON I NEED A HACKER TO RECOVER MONEY FROM BINARY TRADING// FASTFUND RECOVERY.
What a great success working with the best hacking team out there to recover my lost investment in Bitcoin. Earlier last month, I was involved with this online investment scheme that a friend introduced me to, but little did we know that the company was all a scam and never really existed. However, they were offering huge returns on profits, and that triggered my interest the more. The first few weeks were cool. I got paid out a couple of times. All of a sudden, I couldn’t withdraw my funds again, and this time, I am heavily invested in the company. I tried everything I could. Still, all was to no avail and that’s when I knew I needed an extra help here, made a couple of research on how to recover my funds back and I ended up working with “ FASTFUND RECOVERY “ this team were just very good at what they are doing .. with their help I was able to get back all of my initial investment and profits also. They are the best team that someone who is in the same condition that I was needs right now, and make sure you do just that either through their official email: Fastfundrecovery8 (@)gmail com or on Whatsapp 18075007554. website: https://fastfundrecovery8.wixsite.com/fastfundsrecovery …