Turning project: Architectural columns

I recently accepted a project to turn 3 columns for a house in Seattle that was more than 100-years old.  The surviving column was of red cedar, and measured 5.5” by 5.5” by 60 inches long.  Fortunately, my lathe can turn 24-inches by 66-inches long.

I contacted a local lumber dealer that specializes in red cedar and they agreed to cut some logs to the dimensions I needed…for $175.00. 

 

columns-project

 

I set the timber up on the lathe, located the exact center on both ends and marked the centers.  On one end I screwed on a 4-inch diameter face plate using 8 screws, and used a center punch to mark the other end for a live center. 

Silvia and I mounted the timber on the lathe between the spindle and the tailstock, adjusted the speed to 800 RPM (no vibration) and adjusted the tool rest.

 

columns-project-2

 

Accuracy is critical because I am making a reproduction…so I transferred dimensions (distance and diameters) from the sample (old) column to the timber in increments .  I go for one feature at a time, turning a band,  bead or on ovulo as we go. 

Because Cedar is a soft wood, I had to be very careful not to tear away any of the wood with an aggressive or uncontrolled cut.  Even a sharp gouge left a very rough surface….arrgh!!  So what to do?  The best tool for this occasion was my 1 3/8” Alan Lacer skew.

Red Cedar is a very abrasive wood, which demanded frequent sharpening.  Many many many checks with tape measure, 6-“ rule and calipers allowed me to create 3 reproduction columns in 9-hours. 

Putting them side-by-side, any slight differences are negligible, and when installed 8-feet apart they look identical !!!

 

columns-project-1

 

A demanding, and very satisfying project. 

The customer was happy and I was happy for a difficult job that turned out well, keeping in mind that only one mistake means that the valuable wood was useless….we can’t put the wood back!!!

Don't forget to subscribe to our newsletter to receive special member offers directly to your email.

Capt. Jack Wayne 

Related Posts

Boiling Madrone
Boiling Madrone
A recent post shows the Woodwhirled Crew boiling Madrone…and why do we do this? Madrone is a tree that only grows in a n...
Read More
Wood Sources and Preparation
Wood Sources and Preparation
As a beginning woodturner, one of your first anxieties is finding a source of material.  If there is a store nearby that...
Read More
How to fix a wood crack into a feature
How to fix a wood crack into a feature
Has this ever happened to you?  You have an attractive blank you want to turn, and suddenly the inspiration hits….you kn...
Read More

1031 comments

julie Anthony

Dear Brunoe Quick Hack Team,

I am writing to express my heartfelt gratitude for your exceptional service in recovering my scammed funds. As a surgeon and single mother of three, I was devastated by the loss of my savings to a trading scam.

Your team’s expertise and dedication were truly impressive. You worked tirelessly to track down the scammers and retrieve my money. Your professionalism and commitment to customer satisfaction are a testament to your company’s values. WhatsApp: +1-705-784-(2635)

I highly recommend your services to anyone who has fallen victim to a scam. Your help can make a significant difference in recovering lost funds and regaining financial stability. Email: Brunoequickhack@GMAIL.com

Thank you again for your outstanding work.

Sincerely,

Mrs. Julie F. Anthony

Thomas Roland

FINALLY I GOT MY LOST BITCOIN BACK ALL THANKS TO TSUTOMU SHIMOMURA

Hello everyone I want to use this Medium to say big thank you to TSUTOMU SHIMOMURA for they helped me recover my stolen crypto worth $250,000 through their hacking skills I tried it I was skeptical but it worked and I got my money back, I’m so glad I came across them early websites . you can also contact them via WEBSITE: https://tsutomushackexpert.com/ or Email address support@tsutomushackexpert.com, and I’m sure you will be happy you did.

Diamond168ยินดีต้อนรับ

http://diamondlnwpg168.com/
https://paiklangna.com/
https://github.com/11DIAMOND168/Mac/issues/1
https://github.com/22DIAMOND168/Mack/issues/1
https://github.com/DIAMOND168MM/Mac/issues/1
https://github.com/DIAMOND168MM/Mac/issues/1
https://github.com/DAMDAMme11225566/Natoo/issues/1
https://github.com/MAVKMAVK11111111111142/Mack1259/issues/1
https://github.com/sggsdfsdfdsfds6745123/NAgoo168/issues/1
https://github.com/Lertkoonawong/Chartsombat111/issues/1
https://github.com/Prasanwong/Intaraprasart/issues/1
https://github.com/Rattanaprasert/Sangsawang111/issues/1
https://github.com/Narinchanok/Suwanwechatada111/issues/1
https://github.com/Suwankaruna/Dechaboon111/issues/2
https://github.com/Pitijamroen/Rattanaprasert111/issues/1
https://github.com/Roongrudee44/Kwankaew111/issues/1
https://github.com/4DIAMOND168/Phan/issues/1
https://github.com/5DIAMOND168/May/issues/1
https://github.com/3DIAMOND168/Muay/issues/1
https://github.com/6DIAMOND168/Mack/issues/1
https://github.com/2DIAMOND168/Mack/issues/1
https://github.com/1DIAMOND168/Mack/issues/1
https://github.com/12DIAMOND168/Mack/issues/1
https://github.com/16DIAMOND168/Mack/issues/1
https://github.com/8DIAMOND168/Mack/issues/1
https://github.com/7DIAMOND168/Mack1/issues/1
https://github.com/DIAMOND168N/Mavk/issues/1

💎Diamond168 💎ให้ไม่ได้แต่ความเสียใจ

https://diamondlnwpg168.com/
https://www.paiklangna.com/
https://br.advfn.com/forum/perfil/bluezardriri9
https://scrapbox.io/noneyseo1/NonneySeo
https://cara.app/noney168/all
https://www.bitsdujour.com/profiles/aCQrfW
https://yesilkartforum.com/forum/user/noney1688
https://forum.lexulous.com/user/bluezardriri
https://popl.co/profile/KJdIwsLe/dash
https://github.com/Programming-from-A-to-Z/A2Z-F15/issues/30
https://github.com/defunkt/ambitious_activeldap/issues/14
https://github.com/openai/sparse_attention/issues/13
https://github.com/dashpradeep99/https-github.com-miguellgt-books/issues/6
https://github.com/HoyDiamond/DiamondSeo01/issues/1
https://github.com/cy4nguy/PythonSimpleKeylogger/issues/3
https://github.com/gzc/isystem/issues/1
https://github.com/SaeruHikari/SakuraEngine-Old/issues/3
https://github.com/xyba1337/ValorantEZTS/issues/3
https://github.com/henryjeff/portfolio-website/issues/16
https://github.com/EllanJiang/GameFramework/issues/76
https://github.com/HoyDiamond/DiamondSeo01/issues/2
https://github.com/qianjiahao/MongoDB/issues/2
https://github.com/u21h2/nacs/issues/13
https://github.com/Programming-from-A-to-Z/A2Z-F15/issues/31
https://github.com/qw3rtman/p/issues/35
https://github.com/Pleumpi1688/Kittichaiya1680/discussions/1
https://github.com/bitsandbytes-foundation/bitsandbytes/discussions/1631
https://github.com/rafaballerini/GitTutorial/issues/200
https://github.com/Yalantis/uCrop/issues/948

WINNIE HANDSON

THE BEST HACKER RECOVERY FOR LOST BTC /ZENITH HACKER RECOVERY

I hope this message finds you well. I wanted to share my positive experience with ZENITH HACKERS Recovery Services. Initially skeptical about recovering my stolen bitcoins, their expertise and professionalism led to the full recovery of my funds within just 24 hours. Given the prevalence of scams in the cryptocurrency space, I advise caution when selecting recovery services. I highly recommend ZENITH HACKERS for their prompt and effective assistance. Stay safe and vigilant in your crypto endeavors. Their office is located at 100 Preston’s Rd, London E14 9RL, UK. Contact: +44(755)2486027 o r zenithintel@consultant.com.
Website: https://zenithhackers.com

Leave a comment