Spindle Nomenclature - Shapes and Individual Features to Create Spindle Work
We have all chucked up a turning square of one kind or another and, with the set of tools common to most, roughed-out, parted-in, and gouged here, skewed there, and ended up with a potpourri of bumps and hollows that somehow pleased our senses. Lathe-hands over the centuries have been doing exactly that and, not surprisingly, have just about exhausted the number of different shapes that can be generated on a cylindrical surface.
In fact, because that number is relatively small, a system of naming evolved, and the art of turning became a matter of juxtaposing the shapes in ways that appealed to the eye while satisfying function in the final construction.
The figure on the following page includes most of the shapes you will be able to contrive, and the name ascribed to each. Your job is to pick a few of them, put them together in pleasing sizes and sequences, and come up with a work of art, or at least a leg, candlestick, or lamp. Of course the figure shows far too many individual features to be good design.
Only a few are included in most classical pieces. Assuming that the piece shown will be used in a horizontal position, let us start with
the bottom or the base and work to the top. The turners of old probably plunged in with a parting tool to mark the location of each feature first, then went back and finished between the sizing cuts.
The first section is called a plinth (1) because it is at the base and is straight-sided. Next is a torus (2), and it is a large, semi-circular shape. Above the torus is a scotia (3), from the Greek word for “shade,” so called because it is a sunk-in ovolo (compare 7). And next, perhaps the most classical of all basic forms, is the ogee (4). It is just an S shape, but it can be stretched or compressed and is usually asymmetrical in one direction or the other. Note the difference between shapes (4) and (13). With the large bulge below, it is ogee, cyma recta, and with the bulge above, it is ogee, cyma reversa.
An astragal (5) is semi-circular form that extends above the surface of the piece but is much smaller than a torus. A straight section occurring somewhere in an upper area can simply be called a neck (6). Above the neck is a protruding segment of an ellipse, an ovolo (7). Above this is a quarter-hollow (8), topped by a quarter-round (9), and then, abruptly, a ball (10), which could be elongated into an ellipse. The abrupt transition, itself called a quirk, is the only such transition on the spindle; all other shapes are separated by straight sections (called fillets), which are parallel to the axis. The flat that ends the quarter round perpendicular to the axis is just that, a flat.
Cut into the maximum diameter of the ball (or ellipse) is a semicircular bead (11). The difference between a bead and an astragal is now obvious—the bead is cut into a surface and an astragal protrudes above it. Topping the ball, a series of three fillets (12), stair-stepped in reverse, effects the transition to the ogee, cyma reversa (13). Next comes a semi-circular hollow called a cavetto (14).
You might want to call this a cove, which is a loose name for any hollow. If the hollow is semi-circular, it is a cavetto; if it is elliptical, it is a scotia.
Next is a uniform series of three beads (it could be more than three), called a reed (15). The spindle is topped by another vertical, straightsided section similar to the plinth at the bottom. However, because of its position at the top, it is called an abacus (16).
There is just about only one other turned form I can think of—a V, either negative or positive. I have
researched a goodly number of classical turned pieces, and the V is notably absent. Beyond the harsh feel and poor wearing characteristics of the positive V, I do not know why this shape has no classical favor.
So, as woodturners—beginner, intermediate, or expert—I’m quite sure these old names are new to most of you. I feel it worthwhile to resurrect this ancient lore of naming. Happy turning, now that you can name what you are doing to that billet of wood!
Related Posts
Wood Sources and Preparation
How to fix a wood crack into a feature
141 comments
https://statementtuxedos.com/
https://statementtuxedos.blogspot.com/2025/07/black-and-white-tuxedo.html
https://statementtuxedos.mystrikingly.com/blog/wedding-tuxedo-styles
https://statementtuxedos.wordpress.com/2025/07/25/blue-tuxedo-suit/
https://anotepad.com/notes/pb24988f
https://justpaste.it/2z73r
https://sites.google.com/view/best-wedding-suits/home
https://medium.com/@kevinssmith809/mens-designer-tuxedo-deab3d7d821c
https://bondhusova.com/blogs/286540/burgundy-wedding-suit
https://ourfathersfamily.com/blogs/22708/best-tuxedo-for-wedding
https://tuiteres.es/blogs/30028/ivory-tuxedo-wedding
https://connect.usama.dev/blogs/26837/slim-fit-tuxedo-suit
https://app.solpal.io/blogs/50325/off-white-tuxedo
https://globalairgunner.com/read-blog/113690_ivory-suit-wedding.html
https://www.statementsuits.com/
https://statementsuits.blogspot.com/2025/07/mens-suits-black.html
https://statementsuits.mystrikingly.com/blog/men-s-suits-clearance
https://weddingsuitsservies.wordpress.com/2025/07/25/dark-blue-3-piece-suit-wedding/
https://anotepad.com/notes/hmwt9kwn
https://justpaste.it/6lu76
https://sites.google.com/view/navy-blue-suits-weddings/home
https://medium.com/@martjack473/royal-blue-suits-for-wedding-cb3da2709216?postPublishedType=initial
https://bondhusova.com/blogs/286517/Navy-blue-suit-combinations
https://ourfathersfamily.com/blogs/22706/Single-breasted-suit
https://tuiteres.es/blogs/30027/Double-breasted-Suit-Wedding
https://connect.usama.dev/blogs/26841/Modern-double-breasted-suit-for-wedding
https://app.solpal.io/blogs/50323/Modern-double-breasted-suit-men-s
https://globalairgunner.com/read-blog/113679_double-breasted-suit-vs-single.html
https://www.ogitforensics.com/
https://mobile-phone-forensic-malaysia.blogspot.com/2025/07/security-intelligence-in-malaysia.html
https://ogitforensics.mystrikingly.com/blog/dual-shaft-mixer-malaysia
https://ogitforensics.wordpress.com/2025/07/25/live-forensic-in-malaysia/
https://anotepad.com/notes/ji2b63g3
https://justpaste.it/4z07f
https://sites.google.com/view/cyber-threat-intelligence-ser/home
https://medium.com/@archiebaker010/cyber-financial-fraud-investigation-b6f9727733fb
https://bondhusova.com/blogs/286507/Audio-video-forensic-Malaysia
https://ourfathersfamily.com/blogs/22703/Hard-disk-forensic-in-Malaysia
https://tuiteres.es/blogs/30023/mobile-forensic-in-malaysia
https://zeustrahub.osloop.com/read-blog/19406_live-forensic-in-malaysia.html
https://app.solpal.io/blogs/50319/Photo-Forensic-in-Malaysia
https://globalairgunner.com/read-blog/113669_mobile-phone-forensic-malaysia.html
LionCard.com has rich metal cards that rethink style and luxury for people who want to stand out. LionCard has the best work and designs for under $10. They can make you a one-of-a-kind metal card, a custom credit card, or a flashy Bling Empire diamond card. These cards are well-made and come in bright colors with detailed engraving. You can also add diamond details if you’d like. You can make your own credit card with LionCard that shows who you are. You can make safe credit cards like the Suga Cards and Blaq Cards that everyone knows. Look your best when you wear it with Carbon Skins 2. Style and power meet at LionCard.com. Get the best credit card deals to improve your life.
Read More:- https://lioncard.com/
https://lioncard.com/get-dual-card-now/
https://lioncard.com/get-a-custom-card-now/
https://lioncard.com/metal-wallets/
https://lioncard.com/get-digital-business-card-now/
The navy blue tuxedo with two breast pockets from Italsuit.com is a great piece to add to your formal outfit and will look great at any black-tie event in Los Angeles. The fitting on this suit is based on Italian styles and is made with care. The rigid shape, peak lapels, and thin fit make it look good on everyone. This dress is perfect for weddings, galas, and other fancy events because it’s made of soft, high-end fabric that looks good and feels good. Putting on a clean shirt and bow tie will make you look great for a long time. In the same way, You can find camel suits, hunter green suits, and white tuxedo suits in a rust color at Italsuit to complete your classy wardrobe.
Read More:- https://italsuit.com/home.php
https://www.italsuit.com/slim-fit-suits.html
https://www.italsuit.com/CONVERSATIVE-SUITS.html
https://italsuit.com/DOUBLE-BREASTED-SUPER-150-S.html
https://www.italsuit.com/3PC-VESTED-SOLID-COLOR-SUPER-150-S.html